39
When the color temperature of the Speedlite and the color temperature
of the light illuminating the subject are different, unnatural colors may
result for the subject background where the flash does not reach.
By using a supplied color filter suitable for the color temperature of the
illuminating light while firing the flash, you can shoot the subject and
background colors with an appropriate white balance. You can also use
commercially-available color filters.
1
Attach the filter to the holder.
Attach the supplied filter to the holder
as shown in the illustration.
2
Attach the holder to the Speedlite.
Attach the holder to the flash head as
shown.
The flash icon on the LCD panel
changes to <
o
>.
To r em o v e t h e h o ld e r, fo l l ow th e
procedure in reverse order. Raise the
lower filter attachment pins and
remove the holder from the flash
head.
3
Take the picture.
To c o mp e n sa t e f o r t h e c o lo r
temperature of the light source, set
the camera’s white balance to <Q>
and take the picture.
o
Color Filter
Supplied Color Filters
Filter Density
Compensation
Effect
Application
Tungsten light
(orange)
Low Low Compensates for the
effect of a tungsten light
bulb
High High
To Next Page
Loading...
Need help?
General
