Playback
Basic Functions
27
Playback
Playing Back Movies
Play back the tape on the LCD display or
close the LCD panel to use the
viewfinder.
1 Holding the lock button pressed
down, set the switch to
PLAY.
2 Move the / switch to
(tape).
3 Locate the point where you want to
begin the playback.
Press to rewind or to fast
forward the tape.
4 Press to begin the playback.
D
URING
P
LAYBACK
5 Press again to pause the
playback.
6 Press to stop the playback.
NOTES
You can display the date and time of the
recording and other camcorder data registered
when the recording was made ( 56).
During some special playback modes, you
may notice some video problems (blocky video
artifacts, banding, etc.) in the playback picture.
During playback, you may notice some video
problems at the point where the standard of the
recording (HDV/DV) changes.
Playback
(8)
/
/
Special Playback Modes
To enter most special playback modes you need to operate the buttons on the wireless
controller ( 12). There is no sound during the special playback modes.
Special playback mode Initial mode
On the camcorder
press…
On the wireless
controller press…
Fast playback Normal playback Press and hold
or
Press and hold
or
Reverse playback Normal playback —
1 frame reverse/advance Playback pause — or
Frame-by-frame
playback
Playback pause
—
Press and hold
or
Slow playback Normal or reverse
playback
—
Double speed playback Normal or reverse
playback
—
Return to normal
playback
Special playback
mode
REW FF
SLOW
/
PLAY
To Next Page
Loading...
Need help?
General
