Still Image Recording Options
54
POINTS TO CHECK
Mode switch at : The focus priority
cannot be turned off.
Mode switch at
: You can turn off the
focus priority and you can also select the
AF (autofocus) mode to be used.
Options
Default value
* Except for the [ FIREWORKS] recording
program.
NOTES
In the [ FIREWORKS] recording program the
focus priority is automatically set to [ OFF].
Continuous Shooting and Exposure
Bracketing
Take a series of pictures of a moving
subject or record the same picture in 3
levels of exposure in order to choose later
the picture you like the best.
POINTS TO CHECK
Mode switch: (except for the
[ FIREWORKS] recording program).
Options
Default value
(8)
[ ON:AiAF]
(Mode switch: *, )
Depending on the shooting conditions, one
or more AF frames out of the nine frames
available are automatically selected and
the focus is fixed on them.
[ ON:CENTER]
(Mode switch: *)
In this mode, a single focusing frame
appears in the center of the screen and the
focus is automatically fixed on it. This is
convenient for making sure the focus is
exactly where you want it.
[ OFF]
Select this option if you wish to record a
still image as soon as you press .
FUNC.
(21)
MENU
CAMERA SETUP
FOCUS PRI.
Desired option
PHOTO
FUNC.
FUNC.
(8)
[SINGLE]
Records a single still image.
[ CONT.SHOOT. ]
(Continuous Shooting),
[ HISPEED CONT.SHOOT. ]
(High-Speed Continuous Shooting)
Captures a series of still images as long as
you hold
pressed down. For the
number of frames per second, refer to the
notes below.
[ AEB] (Auto Exposure Bracketing)
The camcorder records a still image in
three different exposures (dark, normal,
light in 1/2 EV steps), allowing you to
choose the shot you like the best.
PHOTO
To Next Page
Loading...
Need help?
General
