24
If Paper is Soiled
If the Cleaning Brush is dirty, rinse it in water.•
Do not use a dry cloth to wipe inside the Top Cover . This may create a static charge, which may attract
dust and affect the printing quality.
•
Do not touch the Linear Scale (a) or Carriage Shaft (b).
This may stain your hands and damage the printer.
•
6
7
8
If paper dust has accumulated in the Vacuum holes (a)
on the Platen or in the Borderless Printing Ink Grooves
(b), use the Cleaning Brush (c), provided with the printer,
to wipe it away.
Using a damp cloth that you have wrung out completely,
wipe inside the Top Cover to clean it. Wipe away any ink
residue on the Platen as a whole, on the Paper Retainer ,
Borderless Printing Ink Grooves , and blue Switch .
Close the Top Cover .
a
c
b
a
b
To Next Page
Loading...
Need help?
General