Canon imagePROGRAF iPF6300S Basic Guide No.1 Basic Guide

36
Error Messages
Error Message Cause Corrective Action
This paper cannot be used. Paper that is too large for the
printer has been loaded.
Press the OK button and load paper of the correct
size.
Paper that is too small for the
printer has been loaded.
Press the OK button and load paper of the correct
size.
Paper has been loaded that is too
small to print the test pattern for
printhead adjustment or nozzle
checking.
Press the OK button and load unused paper A4/Letter
(vertical) or larger. More than one sheet may be
required depending on the adjustment.
(→"Paper Sizes," User's Guide)
(→"Paper Sizes," User's Guide)
Manual printing is selected, but
a roll is loaded.
A print job for printing on sheets
was sent when a roll is loaded.
Press ▲ or ▼ to select Remove Roll Paper , and
then press the OK button to stop printing.
1.
After removing the roll, load and print on a sheet of
the type and size of paper you have specified in the
printer driver.
2.
(→
, Removing the Roll from the Printer)
(→"Loading and Printing on Sheets," User's Guide)
Manual printing is selected. You have attempted to print on a
sheet, but no sheet is loaded.
Press ▲ or ▼ to select Load Paper , and then press
the OK button. Load a sheet, and then print.
Press ▲ or ▼ and select Stop Printing or press the
Stop button to stop printing.
(→"Loading and Printing on Sheets," User's Guide)
Cannot print as specified. The loaded paper is too small.
Replace the paper with paper of A4/Letter (vertical)
size or larger as follows.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
Press ▲ or ▼ to select Change Paper , press the
OK button, and remove the paper.
1.
Switch to paper A4/Letter (vertical) or larger.2.
(→
, Removing Sheets)
(→"Loading and Printing on Sheets," User's Guide)
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing , and then press
the OK button to stop printing.
(When you are attempting to print
a test print sheet or other printer
status information.)
Please calibrate using above
paper.
It has become the time for
prompting the execution of color
calibration.
Execute color calibration.
This is displayed when paper is
loaded in the printer and Prompt
Execution is set to On on the
Control Panel menu.
Set Prompt Execution to Off on the Control Panel
menu.
(→
, Menu Map)
(→"Using Color Calibration for Color Adjustment,"
User's Guide)

Canon imagePROGRAF iPF6300S Basic Guide No.1 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6300S Basic Guide No.1
Category	Printer
Language	English