26
Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type
of paper as you will use for printing. Even if you will print on a different type of paper, we recommend using
Auto(Advanced) for adjustment.
•
This function is not available with CAD Tracing Paper or CAD Translucent Matte Film .•
If adjustment is not possible as expected using highly transparent fi lm or similar media, try another type of paper, or
try Manual adjustment.
(→"Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.)," User's Guide)
If Auto(Advanced) does not improve printing, try adjustment in Manual mode.•
Advanced adjustment can enable superior printing quality when printing fi ne lines or text at high precision on glossy
or semi-glossy photo or proofi ng paper.
•
(→"Manual Adjustment to Straighten Lines and Colors (Head Posi. Adj.)," User's Guide)
(→"Enhancing Printing Quality," User's Guide)
If vertical lines in printed documents are warped or colors are out of alignment, execute Head Posi. Adj. . The
printer will print and read a test pattern, and the Printhead position will be adjusted automatically.
If Vertical Lines are Warped or Colors
are Misaligned
This section describes how to perform automatic adjustment of the printhead to
straighten lines and colors.
There are three modes for automatic Printhead adjustment: Auto(Standard) , Auto(Advanced) and
Auto(Expansion) .
Auto(Standard) •
Fixes slight distortion and color misalignment.
Auto(Advanced) •
Try adjustment in this mode if Auto(Standard) does not improve printing.
Auto(Expansion) •
Try adjustment in this mode if vertical lines are warped or colors are out of alignment when the printer driver
option Print Priority is set to Proof .
Items to Prepare
When Using Rolls•
An unused roll at least 10 inches wide
When Using Sheets•
Auto(Standard) : Two sheets of unused paper, A4/Letter size
Auto(Advanced) : Ten sheets of unused paper, A4/Letter size (or fi ve sheets when using A2)
Auto(Expansion) : Seven sheets of unused paper, A4/Letter size (or four sheets when using A2)
To Next Page
Loading...
Need help?
General