E Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held firmly
against the Platen.
F Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
G Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic cutting
is used.
H Automatic Cutting
You can activate or deactivate automatic cutting and printing of cut lines, as desired. In this list, specify Printer Default,
None, or Print Cut Guideline.
I Calibration Value
You can specify whether to apply the results of calibration performed on the printer to image processing.
J Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with the
left and right sides inverted.
View settings Dialog Box for the Printing Application
In the View settings dialog box, you can check details of the selected printing application.
Mac OS X Software
>
Printer Driver
>
View settings Dialog Box for the Printing Application iPF6300
5
492
To Next Page
Loading...
Need help?
General