Canon imagePROGRAF iPF6350 Basic Guide No.2 User Manual

Paper Size
Rolls 8-in. Roll (203.2mm), 10-in. Roll (254.0mm), JIS B4 Roll
(257.0mm), ISO A3/A4 Roll (297.0mm), 300mm Roll (300.0mm),
A3+ Roll (329.0mm), 14-in. Roll (355.6mm), 16-in. Roll
(406.4mm), ISO A2/A3 Roll (420.0mm), 17-in. Roll (431.8mm),
JIS B2/B3 Roll (515.0mm), ISO A1/A2 Roll (594.0mm), 24-in.
Roll (609.6mm)
Print area Normal size Printable area
• Sheets ( Top Paper Feed Slot )
3 mm (0.12 in) from the top, 3 or 23 mm (0.12 or 0.91 in) from
the bottom, and 3 mm (0.12 in) from the left and right sides (The
bottom margin varies depending on the type of paper.)
• Sheets ( Front Paper Feed Slot )
3 mm (0.12 in) from the top, 23 mm (0.91 in) from the bottom,
and 3 mm (0.12 in) from the left and right sides
• Rolls
3 mm (0.12 in) from each side
For information on the recommended print area, see "Print Area."
→P.862
Borderless printing
(*2
→P.862 )
Printable area (rolls)
0 mm from the top, 0 mm from the bottom, and 0 mm from the left
and right sides
Oversize (*2 →P.862 ),
(*3 →P.862 )
Printable area
0 mm from the top, 0 mm from the bottom, and 0 mm from the left
and right sides
Supported width for borderless printing 10-in. Roll (254.0mm), JIS B4 Roll (257.0mm), 14-in. Roll
(355.6mm), 16-in. Roll (406.4mm), ISO A2/A3 Roll (420.0mm)
(*4 →P.862 ), 17-in. Roll (431.8mm), JIS B2/B3 Roll
(515.0mm), ISO A1/A2 Roll (594.0mm) (*4 →P.862 ), 24-in.
Roll (609.6mm)
*1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (See "Types of
Paper.") →P.712
*2: Printing may not be possible in some cases, depending on the type and size of paper.
*3: Load paper at least 6 mm (0.24 in) wider and 6 mm higher than the size selected in Page Size for roll paper. Or,
load paper at least 6 mm wider and 26 mm (1.0 in) higher for the tray.
*4: Borderless printing requires the Spacer for Borderless Printing.
Print Area
A margin required by the printer is added with respect to the size of paper loaded in the printer. Except in borderless print-
ing, the actual printing area corresponds to the paper size minus the space for this margin.
Printable Area Recommended Print Area
Top Edge Bottom Edge Sides Top Edge
Bottom
Edge
Sides
Sheets Top Pa-
per Feed
Slot
3 mm (0.12
in)
3 or 23 mm
(0.12 or 0.91
in)
3 mm (0.12
in)
20 mm (0.79
in)
23 mm (0.91
in)
5 mm (0.20
in)
Printer Parts > Printer Specifications >
Print Area iPF6300
8
862

Canon imagePROGRAF iPF6350 Basic Guide No.2 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6350 Basic Guide No.2
Category	Printer
Language	English