Things You Must Do Before Using This Machine
1-21
Before You Start Using This Machine
1
Things You Must Do Before Using This Machine
This section describes the important setting registrations and procedures that must be done
before the machine is used for sending operations. For the further details of the operations, see
“Things You Must Do Before Using This Machine” in the Sending and Facsimile Guide.
IMPORTANT
•
If you attempt to use the machine without registering the necessary information correctly, the machine
may not function properly.
•
Network settings have to be specified in order to send scanned documents to an e-mail address, an
I-fax address, or a file server. (See “Basic Network Setting,” in the Network Guide.)
NOTE
Depending on the destination, the following options are required:
- E-mail, I-fax, file server: the Color Send Kit (standard for the iR2022i/iR2018i) activated
- Fax: the Super G3 FAX Board installed
Selecting the Type of Telephone Line
Set the type of telephone line that is connected to the machine.
NOTE
•
This setting is required only when the optional Super G3 FAX Board is installed.
•
The default setting is ‘Tone’.
1
Press (Additional Functions) ➞
[Communications Settings].
To Next Page
Loading...
Need help?
General
