22
Menu Operation
Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Press the MENU button to display the On-Screen Menu. Press
Point
7 8 buttons to move the red frame pointer to INPUT
Menu icon.
Press Point d button to move the red arrow pointer to
Computer and then press SET button. The Source Select Menu
will appear.
1
2
INPUT button
Computer
Video
INPUT MENU
Input Menu icon
Input Source Selection
Computer Input
Move the pointer to the correct input source and press SET
button.
3
When the input source is coming from a computer
through the RGB IN / COMPONENT IN terminal,
select RGB.
RGB
RGB (Scart)
Component
☞ " Selecting Input Source (Component / RGB-Scart
21-pin ) " P31.
Move the pointer (red
arrow) to Computer and
press SET button.
Move the pointer to RGB and
press the SET button.
Source Select Menu
☞ " Selecting Input Source (Component / RGB-Scart
21-pin ) " P31.
To Next Page
Loading...
Need help?
General
