31
Video input
Input Source Selection ( Component, RGB Scart 21-pin )
Menu Operation
Direct Operation
Choose Computer by pressing INPUT button on the top control or
COMPUTER button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Press MENU button to display the On-Screen Menu. Press
Point
7 8 button to move the red frame pointer to INPUT Menu
icon.
Press Point d button to move the red arrow pointer to
Computer and then press SET button. The Source Select Menu
will appear.
1
2
INPUT button
Video
Computer
Move the pointer to the source that you want to select and then
press SET button.
3
INPUT MENU
Move the pointer to
Component or RGB ( Scart )
and press the SET button.
Source Select Menu
When the input source is coming from video
equipment connected to the RGB IN
/COMPONENT IN terminal with a Component-VGA
Cable, select Component.
Component
When the input source is coming from video
equipment connected to the RGB IN
/COMPONENT IN terminal with a Scart-VGA Cable,
select RGB (Scart).
RGB (Scart)
Note :
Component-VGA Cable and Scart-VGA Cable are optionally supplied. See page
51 for order.
Input Menu icon
Move the pointer (red
arrow) to Computer and
press SET button.
To Next Page
Loading...
Need help?
General
