30
Input Source Selection ( Video, S-Video )
Menu Operation
Direct Operation
Choose Video by pressing INPUT button on the top control or VIDEO
button on the remote control unit.
Before using these buttons, correct input source should be selected
through menu operation as described below.
Press MENU button to display the On-Screen Menu. Press
Point
7 8 buttons to move the red frame pointer to INPUT
Menu icon.
Press Point d button to move the red arrow pointer to Video
and then press SET button. Source Select Menu will appear.
1
2
Move the red arrow
pointer to Video and
press SET button.
VIDEO
Move the pointer to the
source and press SET button.
Source Select Menu (VIDEO)
INPUT MENU
INPUT button
Video
Computer
Move the pointer to the source that you want to select and then
press SET button.
3
When selecting Auto, the projector automatically detects
incoming video signal, and adjusts itself to optimize its
performance. The projector selects connection in the
following order:
1st S-VIDEO
2nd VIDEO
The S-VIDEO has priority over the VIDEO
Auto
When video input signal is connected to VIDEO jack,
select Video.
Video
When video input signal is connected to S-VIDEO jack,
select S-Video.
S-Video
Video Input
To Next Page
Loading...
Need help?
General
