62
FUNCTION DESCRIPTION
Blank Timer
Sets the image blank time when the Blank feature is
activated, once elapsed the image will return to the screen.
See "Hiding the image" on page 46 for details.
Panel Key Lock
Disables or enables all panel key functions except
POWER on the projector and keys on the remote
control. See "Locking control keys" on page 46 for details.
Sleep Timer
Sets the auto-shutdown timer. The timer can be set to a
value between 30 minutes and 12 hours.
Splash Screen
Allows you to select which logo screen will be displayed
during projector start-up. See "Personalizing the projector
menu display" on page 47 for details.
High Altitude Mode
Set this function to On to maintain optimum system
performance when using the projector at an altitude of 1500
m to 3000 m within a temperature range of 0°C to 30°C.
Set High Altitude Mode to Off when using the projector at
an altitude of 0 m to 1499 m within a temperature range of
0°C to 35°C.
If High Altitude Mode is set to On, the cooling fan speeds
up which increases the operating noise, and the amount of
power consumed also increases.
Audio Settings See "Adjusting the sound" on page 47 for details.
Menu Settings
See "Personalizing the projector menu display" on page 47
for details.
Lamp Settings
Lamp Mode
See "Setting Lamp Mode as Economic" on page 66 for
details.
Reset Lamp Time
See "Resetting the lamp timer" on page 70 for details.
Lamp Time
See "Getting to know the lamp hour" on page 66 for details
on how the total lamp hour is calculated.
Filter Settings
Filter Mode
Allows the filter timer to start or resume counting. See
"Setting Filter Mode as On" on page 64 for details.
Reset Filter Time
Resets the filter timer only after the filter is replaced. See
"Resetting the filter timer" on page 65 for details.
Security Settings
See "Utilizing the password function" on page 35 for
details.
4. SYSTEM SETUP: Basic menu
5. SYSTEM SETUP: Advanced menu
To Next Page
Loading...
Need help?
General
