Copying on Photo Paper
Load the original on the platen to copy on the KG/10x15cm(4x6), 13x18cm(5x7), or Square size
(127x127mm) photo paper.
1. Check that printer is turned on.
2.
Load paper.
Load KG/10x15cm(4x6), 13x18cm(5x7), or Square size (127x127mm) photo paper.
Select KG 4"x6"/10x15cm, 2L 5"x7"/13x18cm, or 5"x5"/13x13cm size for paper size setting on the
LCD.
3.
Load the original on the platen.
4.
Press the Black button or the Color button.
The segment display on the LCD flashes.
When the segment display changes from flashing to lit, the printer starts copying.
Remove the original on the platen after copying is complete.
•
To make multiple copies
Press the Color button or the Black button repeatedly according to the number of copies you want
during the segment display flashes.
Press the same button (Color button or Black button) as the one which you previously pressed.
•
To cancel copying
Press the Stop button.
Important
• Do not open the document cover or remove the original from the platen until scanning is completed.
While the printer is scanning the original, the ON lamp keeps flashing.
231
To Next Page
Loading...
Need help?
General