{ Designating Images for Transfer (DPOF)
110
Designating All Images
Select [Transfer Order].
● Press the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Select [Mark all].
● Press the qr buttons to select [Mark all],
then press the m button.
● Press the qr buttons to select [OK], then
press the m button.
X All images will be designated together.
Reset All
Select [Transfer Order].
● Press the · button, select the 1 tab.
Press the op buttons to select [Transfer
Order], then press the m button.
Select [Reset].
● Press the qr buttons to select [Reset],
then press the m button.
● Press the qr buttons to select [OK], then
press the m button.
X All transfer orders are removed.
may display when using a memory card with transfer settings set by a
different camera. If you change settings with this camera, the previously
made settings may be overwritten.
(EC248) CDI-E386_Guide_E.book Page 110 Thursday, June 19, 2008 4:52 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
