98
You can automatically playback images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slide Show].
● Press the · button, select the 1 tab.
Press the op buttons to select [Slide
Show], then press the m button.
Select a transition effect.
● Press the qr buttons to select a transition
effect, then press the m button.
X A few seconds after “Loading image…”
displays, the slideshow will start.
● You can pause/restart a slideshow by
pressing the m button again.
● Press the · button to stop the
slideshow.
Images display without transition effect.
The next image displays gradually.
The image slides out to the left and the next image appears.
• If you press the qr buttons during a slideshow, the image will change
(if you hold the buttons pressed, the images move faster).
• Power saving function does not work during slideshows (p. 42).
(EC248) CDI-E386_Guide_E.book Page 98 Thursday, June 19, 2008 4:52 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
