8
First Time Settings
Setting the Date/Time
1. Turn the camera on (a) in Shooting mode
( ) or Playback mode ( ).
2. Select the item you wish to set
using the W or X button and set
its value using the S or T
button (b).
To set daylight saving time, select
and set it with the S or T
button.
3. Confirm that the correct time is
displayed and press the SET
button (c).
The date/time can also be set in
the Set up menu (p. 22).
Setting the Display Language
1. Turn the camera on (a) in Playback mode ( ).
2. Hold down the SET button and press the MENU button.
3. Use the S, T, W or X button to select a language, then press
the SET button.
The display language can also be set in the Set up menu (p. 22).
When you turn on the camera the first time, or when the
lithium date battery charge is low, the [Date/Time] menu
appears.
Î
See the Advanced Guide: Replacing the Date Battery (p. 177).
To Next Page
Loading...
Need help?
General
