7
Preparations
3. Fold the LCD monitor back against the
camera body until it clicks into place.
When the LCD monitor clicks into
place, the image will display normally
(not reversed).
Turning the Power On/Off
1. Turn the mode lever to
(Shooting) or (Playback)
while pressing the release
button.
The power/mode indicator lights
orange or green.
• When switching between
shooting and playback, turn the
mode lever to or * while
pressing the release button.
*
The camera switches to Playback mode, but the lens does not retract
(the lens will retract if you turn the mode lever to once more).
• In Playback mode, you can also switch to Shooting mode by
pressing the shutter button halfway or pressing the Movie
button.
2. Press the OFF button to turn
the power off.
Î
See the Advanced Guide: Using the LCD Monitor and the
Viewfinder (p. 13).
Always keep the LCD monitor closed with the display facing
the camera body when the camera is not in use. When you
push the LCD monitor until you hear the clicking sound, the
LCD monitor will automatically turn off, and the image will
display in the viewfinder.
Power/Mode
Indicator
Mode Lever
Release
button
To Next Page
Loading...
Need help?
General
