3. Click Exit on Start Setup screen and finish setup.
4. Turn off printer.
5. Restart computer.
6. Make sure you have no application software running.
7.
Perform setup on top page of Online Manual.
Note
• You can use the Setup CD-ROM to redo setup.
•
For macOS:
1. Click Next.
The screen telling you that installation has not been completed appears.
2. Click No.
The screen to select application software to install appears.
3. Click Back to Top.
4. Click Exit on Start Setup screen.
5. Turn off printer.
6.
Restart computer.
7.
Make sure you have no application software running.
8.
Perform setup on top page of Online Manual.
331
To Next Page
Loading...
