7-24
Note
During initializing,
● The camera head moves to face front, and then moves back to the current position.
Please note that video will be recorded during this time, if using VK-64 or other
recording software.
● Live video is displayed on the Viewer.
● Video out of the visible range may be displayed.
● Initializing precedes any Viewer control privileges.
● Motion detection and Preset Tour functions are suspended.
● Video recording, audio recording and audio playback are not available.
● Panorama pictures cannot be taken.
● Never touch the camera head as this could prevent successful initialization and
cause faults.
w Auto
The camera head position is periodically initialized by selecting a specified time or intervals.
• Do not initialize automatically
Does not initialize periodically.
• Initialize the camera head position at specified time
Initializes on the days of week you have selected. You can check more than one day at a time, and set
the time by one minute at minimum.
• Initialize the camera head position at set intervals
Initializes at the specified intervals, counting from the moment you save setting and reboot. Intervals
can be adjusted by one hour and up to 23 hours.
• Save Setting and Reboot
After settings are made for [Auto], click the “Save” button to reflect the changes.
* Rebooting takes 20 to 40 seconds.
007-VBC50i-E-US 06.7.6, 11:38 AM24
To Next Page
Loading...
Need help?
General
