1-3
1
Before Use
Installed Software
VB-M700/600/40 Viewer
(See Chapter 7 “Admin Viewer/VB Viewer”)
There are two types of Viewer: the VB Viewer, which can
be used by Guest Users, and the Admin Viewer for
Administrators.
The VB Viewer allows users to configure basic camera
controls and display images.
The Admin Viewer lets you monitor all camera controls
and events.
Only JPEG images are displayed. To display H.264 video,
install the RM-Lite Viewer (p. 1-5).
Admin Tools (See Chapter 6 “Admin Tools”)
The following tools for configuring camera settings and
performing management functions are available:
• Privacy Mask Setting Tool
• Intelligent Function Setting Tool
• Log Viewer
• Panorama Creation Tool
• View Restriction Setting Tool
•Preset Setting Tool
Included Software
The included Setup CD-ROM contains the following
software. Install the software on a PC to use it.
VB Initial Setting Tool
(See Chapter 2 “Initial Settings”)
This tool performs initial settings for the camera.
Admin Tools Certificate (p. 2-4)
This electronic certificate is required to use the Admin
Viewer and Admin Tools.
Camera Angle Setting Tool
(See Chapter 3 “Camera Angle Setting Tool”)
With this tool, you can operate the camera during
installation while you view video over the network on a PC.
.NET Framework 3.5 SP1/.NET Framework
4.5
This execution environment is required to use the software
included in the camera.
RM-Lite (p. 1-5)
This software displays and records images from up to four
cameras in real time.
Proxy Authentication Admin Viewer/Admin
Tools
This software lets you use Admin Viewer/Admin Tools via
a proxy server with proxy authentication. It is saved in the
ProxyAuthSupport folder on the Setup CD-ROM.
Backup and Restore Tools
The tools back up camera setting information to the PC.
Information from multiple cameras can be saved at the
same time.
The tools can also restore information saved on the PC to
the camera.
Camera Software
To Next Page
Loading...
Need help?
General
