Canton Smart Amp 5.1 User Manual

86
English
Using Chromecast built-in
Requirements:
• (Mobile) device with activated WiFi and Bluetooth® function.
• Network access (wireless by WiFi or wired by Ethernet)
• The "Google Home app"
• An app that supports playback via Chromecast built-in (e.g. Spotify Music, AllCast, TuneIn, etc.).
Audio playback with the "Google Home app" directly is not possible.
• Please keep the standard settings of your WiFi router. Changing the settings of your router, especially changes on the DHCP settings,
could lead to no or instable network connection. For compatible routers please refer to the following Link.
https://support.google.com/chromecast/table/6207416
To use the integrated function Chromecast built-in, you need to install the "Google Home app" on your (mobile) device and to connect the
device to the Amp 5.1. Therefore your (mobile) device and the Amp 5.1 must be connected to the same network.
Please do as follows:
1
Power up your Smart Amp 5.1 and start your (mobile) device. The WiFi and Bluetooth® function must be activated on your (mobile)
device. If the Amp 5.1 has been disconnected from the mains please wait with the procedure until the display indicates [NET] followed by
[SET].
Note: If you have already installed the "Google Home app" on your (mobile) device, you can skip item 2 and 3 below.
2
Open the Play Store/ App Store on your (mobile) device.
3
Search for the "Google Home app" and install it on your (mobile) device. You will need to accept access to several items, like identity and
others.
4
Start the "Google Home app" and follow the instructions. You will need to assign a Google Account to this app. Please register or login to
your account.
5
Your (mobile) device will now search for available devices in range. If neccessary, you may have to select the related search function ma-
nually.
6
Select Smart Amp 5.1xxxxx as device to be installed.
7
Now, the (mobile) device tries to connect to the Amp 5.1. Please follow the instructions of the "Google Home app".
8
After the connection has been established the Amp plays a melody (sound sequence) through the connected speakers. Please confirm in

Canton Smart Amp 5.1 Specifications

General

Video in	3x HDMI
Video out	1x HDMI
Ethernet LAN (RJ-45) ports	1
Speakers connectivity type	-
Product color	Black
Volume control	Touch
Cables included	AC
Treble adjustment	Yes
Connectivity technology	Wired & Wireless
Audio decoders	DTS-HD, Dolby Atmos
Audio output channels	- channels
Peak power per channel	600 W
Signal-to-Noise Ratio (SNR)	- dB
Total Harmonic Distortion (THD)	- %

Weight and Dimensions

Depth	154 mm
Width	245 mm
Height	120 mm
Weight	5240 g