90
English
Preset Buttons 1-3 (Presets)
The Amp 5.1 is able to store settings to the 3 preset buttons. All settings in the speaker menu (selected input, volume, sound settings, gain
adjustments, etc.) as well as playlists from the app "Spotify" can be stored. It is recommended to store all settings that have been made
during the "initial installation" to a preset, so they do not have to be entered again after an accidental overwrite by pressing one of the preset
buttons by accident.
Storing of inputs and tone control settings:
1
You can store inputs and selected tone control settings to the preset buttons 1, 2 and 3. Therefore please select the desired input (e.g.
HDMI 1) and
adjust the main volume and as the case may be additional tone control settings to a desired value. To store the settings press and hold the
according preset button 1, 2 or 3 on the remote until the corresponding number P1, P2 or P3 is shown in the LED display and the display
stopped flashing.
2
To recall the stored settings please press the according button 1, 2 or 3. The display indicates the selected preset (P1, P2 or P3). The input
and as the case may be additional tone control settings are selected/executed.
Storing playlists from the app "Spotify":
1
Open a previously created playlist in the app "Spotify" on your (mobile) device and start the playback. Please select Spotify Connect (not
Chromecast built-in) as connection type to the Amp 5.1.
2
To "store" a playlist press and hold the corresponding preset button 1, 2 or 3 on your remote until the corresponding number P1, P2 or P3
is shown in the LED display and the display stopped flashing.
3
To recall the stored playlist please press the corresponding button 1, 2 or 3. The tracks of the stored playlist will then be played back auto-
matically through the Amp 5.1 without having to use your (mobile) device to start the playback.
Notes: • You can store various settings to the 3 preset buttons, e.g. preset 1 = HDMI
®
input 1 and tone control settings, preset 2 = playlist
from the app "Spotify" + tone control settings, preset 3 = input CD + tone control settings.
• Storing settings to a preset will include all settings that are active on the Amp 5.1 at that time. Storing a playlist to a preset
incldes all the other settings (volume, tone control settings, etc.) that are active on the Amp 5.1 at that time
• To delete a playlist and/or stored settings from a preset, press and hold the according button for ca. 10 seconds until the desired
preset (P1, P2 or P3) flashes rapidly in the display.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
