3
51
English
FURTHER IMPORTANT INFORMATION
Information on “Intended Use”
The Smart Connect 5.1 is designed for indoor use and must not be used outdoors or in
a wet environment. Do not make any conversions or modifi cations to the device. Con-
nect the device as described in the instructions and observe the safety instructions.
Only operate the device with the mains voltage and frequency specifi ed on the rating
plate.
Information about an environmentally friendly operation
To reduce the power consumption, switch the Smart Connect 5.1 to standby mode by
pressing the Power
„ “
button when not in use. This “saves power” and lowers your
electricity bill.
Information about the CE marking
Electrical and electronic devices placed on the market within the European
Union must be given a CE mark to indicate that the equipment complies
with the applicable requirements (e.g. equipment safety or electromagnetic
compatibility).
Disposal instructions
According to the EU Directive on Waste Electrical and Electronic Equip-
ment, devices marked with this symbol must not be disposed of together
with municipal waste (household waste). Please inform yourself, if necessary,
contact your local disposal company or the municipal/city administration
about the free disposal for you. It serves the environmental and health
protection as well as the saving of (rare) raw materials by recycling.
Batteries must also not be disposed of together with general household
waste. They must be collected separately and returned to a battery col-
lection point. Throw empty batteries into the collection containers free of
charge, for example, those situated at the trade. Improperly disposed of
batteries can harm human and animal health and/or the environment.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
