4
ACCESSORIES
ORDER NUMBER DESCRIPTION 18---32 24---31 30---31 36---31 42---31 48---31 60---31
HC34GE239 BALL BEARING MOTOR X
HC34GE240 BALL BEARING MOTOR X X
HC38GE228 BALL BEARING MOTOR X
HC40GE226 BALL BEARING MOTOR X
HC40GE228 BALL BEARING MOTOR X X
KAACH1201AAA CRANKCASE HTR X S S
KAACH1401AAA CRANKCASE HTR X X X X
KSACY0101AAA CYCLE PROTECTOR X X X X X X X
KAAFT0101AAA FREEZE THERMOSTAT X X X X X X X
KSAHS1701AAA HARD START X X X X X X X
KHAIR0101AAA ISOLATION RELAY X X X X X X X
KSALA0301410 LOW AMBIENT PSW X X X X X X X
KSALA0601AAA{ MOTORMASTER 230V X X X X X X X
KHAOT0201SEC OUTDOOR THERMOSTAT X X X X X X X
KHAOT0301FST OUTDOOR THERMOSTAT X X X X X X X
KHALS0401LLS SOLENOID VALVE X X X X X X X
KSASH0601COP SOUND BLKT X X X X X X
KSASH2101COP SOUND BLKT X
KAACS0201PTC STARTASSISTPTC X X X X X X X
KSASF0101AAA SUPPORT FEET X X X X X X X
KAATD0101TDR TIME DELAY RELAY X X X X X X X
KSATX0201PUR TXV PURON HSO X X X
KSATX0301PUR TXV PURON HSO X X
KSATX0401PUR TXV PURON HSO X
KSATX0501PUR TXV PURON HSO X
x = Accessory S = Standard
{ Required accessories include ball bearing fan motor, compressor start assist (CAP / Relay), crankcase h eater, evaporator freeze stat, isolation relay, hard
shut ---off TXV or liquid line solenoid valve.
ACCESSORY THERMOSTATS
THERMOSTAT / SUBBASE
PKG.
DESCRIPTION
TSTATCCPRH01--- B*
Thermidistatt Control — Non --- Programmable/Programmable Thermostat with Humidity Control (For use in
Hybrid Heatt (Dual Fuel), AC, HP, and 2S applications. Includes Outdoor Air Temperature Sensor.)
TSTATCCPHH01--- B*
Hybrid Heatt (Dual Fuel) Thermostat — Auto Changeover, 7---Day Programmable, °F/°C, Includes Outdoor
Sensor (TSTATXXSEN01---B)
TSTATCCPHP01---B Thermostat — Auto Changeover, 7---Day Programmable, °F/°C , 2 --- S t a g e H e a t , 1 --- S t a g e C o o l
TSTATCCNHP01---C Thermostat — Auto Changeover, Non--- Programmable, °F/°C , 2 --- S t a g e H e a t , 1 --- S t a g e C o o l
TSTATCCSHP01
Standard Programmable Thermostat—Manual Changeover, 5--- 2 Day Programmable, °F/°C , 1 --- S t a g e H e a t /
1 --- S t a g e C o o l
TSTATCCBHP01---B*
Builder’s Thermostat — Heat Pump, Non--- Programmable, °F/°C , 2 --- S t a g e H e a t , 1 --- S t a g e C o o l , M a n u a l
Changeover
TSTATXXSEN01---B* * Outdoor Air Temperature Sensor
TSTATXXNBP01 Backplate for Non--- Programmable Thermostat
TSTATXXPBP01 Backplate for Programmable Thermostat and Thermidistatt Control
TSTATXXSBP01 Backplate for Standard Programmable Thermostat
TSTATXXBBP01 Backplate for Builder’s Thermostat
TSTATXXCNV10{ Thermostat Conversion Kit (4 to 5 Wire) — 10 Pack
* Do not use in zoning heat pump applications.
** Outdoor temperature sensor is an accessory for all Carrier electronic thermostats, except the non ---programmable air conditioner version and builder;s
thermostats. It allows the temperature at a remote location (outdoors) to be displayed on the thermostat. The outdoor air temperature sensor must be used
with the dual fuel thermostat.
{ Thermostat conversion kit is a 24---vac accessory that can turn a 4---wire thermostat application into a 5 ---wire application. Th is kit can al so be used to
replace a broken thermostat wire, or add an extra wire when needed.
The outdoor air temperature sensor is included with the Thermidistat Control and dual fuel thermostat.
25HBA3
To Next Page
Loading...
Need help?
General