Time Adjustment
Your watch can connect with a phone to obtain
information that it uses to adjust its date and
time setting.
Important!
●
When you are on an aircraft or in any
other location where radio signals area
may cause problems, enable the
watch’s Airplane Mode to disable
connection with your phone.
l
Using the Watch in a Medical
Facility or Aircraft
Referring to the information below, configure
the time setting in accordance with the method
that suits your own lifestyle.
Do you use a phone?
Time adjustment by connecting with your
phone is recommended.
l
Auto Time Adjustment
If your phone cannot connect with the
watch
You can adjust time settings by
performing operations on the watch.
l
Using Watch Operations to Adjust the
Time Setting
Using Watch Operations to
Adjust the Time Setting
If your watch cannot connect with a phone for
some reason, you can use watch operations
to adjust date and time settings.
●
Setting a Home City
Use the procedure in this section to select a
city to use as your Home City.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
3. Use (A) and (C) to move the pointer to
[HOME TIME].
4. Press (B).
5. Use (A) and (C) to move the pointer to
[CITY].
6. Press (B).
7. Use (A) and (C) to move the pointer to the
city you want to use as your Home City.
8. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Home Time
setting screen will re-appear.
9. Press (D) twice to exit the setting screen.
●
Configuring the Summer Time Setting
If you are in an area that observes summer
time, you can also enable or disable summer
time.
Note
●
The initial factory default summer time
setting for all cities is [AT (AUTO)]. In
many cases, [AT (AUTO)] lets you use
the watch without switching manually
between summer time and standard
time.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
3. Use (A) and (C) to move the pointer to
[HOME TIME].
4. Press (B).
5. Use (A) and (C) to move the pointer to
[DST].
6. Press (B).
7. Use (A) and (C) to select a summer time
setting.
[AUTO]
Auto switching between standard
time and summer time
[OFF] Always standard time
[ON] Always summer time
8. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Home Time
setting screen will re-appear.
9. Press (D) twice to exit the setting screen.
Watch Operation Guide 3506
17
To Next Page
Loading...
Need help?
General
