Casio 3506 User Manual

Specifying the Distance Unit
Important!
●
When Tokyo (TOKYO) is the Home
City, the distance unit is fixed as
kilometers (km) and cannot be
changed.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (C) to move the pointer to
[UNIT].
4. Press (B).
5. Use (A) and (C) to move the pointer to
[DISTANCE].
6. Press (B).
7. Use (A) and (C) to select a distance unit.
[KILOMETER] Kilometers
[MILE] Miles
8. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the unit setting
screen will re-appear.
9. Press (D) twice to exit the setting screen.
Note
●
You can also use G-SHOCK MOVE to
change the distance unit.
Enabling Auto Lap Timing
While Auto Lap Timing is enabled, each time
you run the distance you specified with G-
SHOCK MOVE the lap time will be recorded
automatically.
l
Specifying the Distance for Auto Lap
Timing
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (B).
This displays the Training Mode screen.
3. Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
4. Use (A) and (C) to move the pointer to
[AUTO LAP].
5. Press (B).
6. Use (A) and (C) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
7. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Training
Mode setting screen will re-appear.
8. Press (D) to exit the setting screen.
Note
●
You can also use G-SHOCK MOVE to
enable or disable Auto Lap Timing.
Enabling Auto Pause
While Auto Pause is enabled, timing will pause
whenever you stop running.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (B).
This displays the Training Mode screen.
3. Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
4. Use (A) and (C) to move the pointer to
[AUTO PAUSE].
5. Press (B).
6. Use (A) and (C) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
7. Press (B) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Training
Mode setting screen will re-appear.
8. Press (D) to exit the setting screen.
Note
●
You can also use G-SHOCK MOVE to
enable or disable Auto Pause.
Watch Operation Guide 3506
23

Casio 3506 Specifications

General

Brand	Casio
Model	3506
Category	Watch
Language	English