●
Checking the Charge Level
You can determine the watch’s current charge
level by checking the position of the
retrograde dial hand.
Charge LevelA: Good (High)
Charge LevelB: Good (Medium)
Charge LevelC: Good (Medium)
Charge LevelD: Low
●
Remaining Charge and Dead Battery
You can determine if the charge level is low by
checking the hand movement. Functions
become disabled as battery power goes low.
Important!
●
Should battery go low or go dead,
expose the
face (solar panel) to light
as soon as possible.
Note
●
Exposing the watch face to light after
the battery goes dead will cause the
second hand to revolve
counterclockwise until it stops at
second 57. This indicates charging
has started.
Low Battery Power
The second hand jumps at two-second
intervals.
Dead Battery
All hands and the day indicator are stopped.
●
Charging Time Guidelines
The table below shows guidelines for
approximate charging times.
Required Charging Time for 1-day Use
Light Intensity Approximate Charging Time
High
p
Low
A
8 minutes
B
30 minutes
C
48 minutes
D
8 hours
Time Required to Achieve Next Charge
Level
Light Intensity
Approximate Charging Time
Charge Level
1
Charge Level
2
High
p
Low
A
2 hours 23 hours
B
6 hours 85 hours
C
8 hours 137 hours
D
93 hours -
Charge Level 1 :
Time from dead battery until hand movement
starts
Charge Level 2 :
Time from hand movement starts until a full
charge
Light Intensity
A
Sunny day, outdoors (50,000 lux)
B
Sunny day, near a window (10,000 lux)
C
Overcast day, near a window (5,000 lux)
D
Indoor fluorescent lighting (500 lux)
Note
●
Actual charging
time depends on the
local charging environment.
●
Power Saving
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the second hand to stop, and
the watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
days, all hands will stop at 12 o’clock and the
watch will enter Level 2 power saving.
Level 1 :
Second hand stops to save power.
Level 2 :
The following operations are stopped to save
power:
all
hand movement (excluding the day
indicator), Bluetooth connection, and alarm
alerts.
Recovering from Power Saving Operation
Press any button or place the watch in a well-
lit area to recover from power saving.
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the
watch and phone, the watch time
setting is adjusted automatically in
accordance with the phone’s time setting. You
can also change the watch’s time settings.
Note
●
This function is available only while
CASIO WATCH+ is running on the
phone.
●
This section describes watch and
phone operations.
X : Watch operation
Y : Phone operation
Getting Ready
A Installing applications
To use the watch with a phone, first tap one of
the links
below and install the “CASIO WATCH
+” app on the phone.
●
iOS (iPhone) Users
https://itunes.apple.com/us/app/
id760165998?ls=1&mt=8
●
Android
TM
(GALAXY, etc.) Users
https://play.google.com/store/apps/details?
id=com.casio.watchplus
B
Configuring Bluetooth Settings
Enable the phone’s Bluetooth.
Note
●
For details about setting
procedures, see your phone
documentation.
Operation Guide 5512
4
To Next Page
Loading...
Need help?
General
