Connection
Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
●
If
the watch is not paired with the phone you
want to connect with, refer to the information
below and pair them.
l
C
Pair the watch with a phone.
1.
Move
the phone close to (within one meter
of) the watch.
2.
X
If the second hand is not point at [C],
hold down (A) for at least 2.5 seconds.
Release
the button when the second hand
moves to [C].
This establishes a connection between
the watch and phone.
Important!
●
If you have problems establishing a
connection, it could mean that
OCEANUS Connected is not running
on the phone. On the phone’s home
screen, tap the “OCEANUS
Connected” icon. After the app starts
up, hold down the watch’s (A) for at
least 2.5 seconds. Release the button
when the second hand moves to
[C].
Note
●
The connection will be terminated if
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with
OCEANUS Connected:
“Watch
settings”
n
“Connection time”. Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.
Canceling a Connection with a
Phone
Pressing (A) terminates the Bluetooth
connection
and returns the second hand to its
normal operation.
30 30
Disconnected
Connected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto time
calibration
signal receive or connection with a
phone may cause problems, you can perform
the procedure below to disable such
operations. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y
Tap the
“OCEANUS Connected” icon.
2.
X
Hold down (A) for at least 2.5 seconds.
Release
the button when the second hand
moves to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
1.
X
If the watch is connected with a phone,
press (A) to terminate the connection.
30 30
Disconnected
Connected
2.
Y
Tap the
“OCEANUS Connected” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
If you purchase another phone
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
C
Pair the watch with a phone.
Adjusting Hand and
Day Indicator
Alignment
Strong magnetism or impact can cause the
hands and/or the day indicator to go out of
alignment. If this happens, adjust hand and
day indicator alignment.
●
The watch performs alignment of the hour
hand, minute hand, and second hand
automatically.
Operation Guide 5596
10
To Next Page
Loading...
Need help?
General
