Casio 5596 User Manual

7.
Press (A).
This changes to the month setting
operation.
8.
Rotate the crown to change the month.
Month
8
4
9
2
10
5
7
1
11
6
12
3
9.
Press (A).
This changes to the day setting operation.
10.
Rotate the crown to change the day.
30
Day
11.
On a time signal at the top of a minute,
push the crown back in.
Note
●
If the watch does not indicate the
correct time even after you adjust it,
adjust the hand and day indicator
positions.
l
Using OCEANUS Connected to
Correct Hand Positions
l
Using Watch Operations to Correct
Hand Positions
Configuring the Summer Time
Setting
The watch’s current time setting can be
change to summer time when required.
[STD]: The watch always indicates standard
time.
[DST]: The watch always indicates summer
time.
Important!
●
If the time zone is an area where time
calibration
signal reception is possible,
you can select [AT] (Auto) for the
summer time setting. While [AT] is
selected, the first time calibration
signal receive operation after the time
zone enters the summer time period
will cause the watch’s time setting to
switch to summer time. The first time
calibration signal receive operation
after the end of the summer time period
is reached will cause the watch’s time
setting to switch to standard time.
For information about areas where
time calibration signals can be
received, go to the section below.
l
City (Time Zone) List
1.
Pull out the crown to the first click.
The second hand will point to the currently
selected time zone.
2.
Hold down (A) for at least one second.
Each time you hold down (A) for at least
one second, the summer time setting will
cycle to the next available option.
30
3.
Push the crown back in to its normal
position.
Checking the Last Time
Adjustment Result
1.
Press (A).
The second hand will indicate the last time
adjustment operation result. The watch
hands will return to indicating the current
time if you do not perform any operation
for nine or ten seconds.
[Y(YES)]: Last time adjustment operation
successful.
[N(NO)]: Last time adjustment operation
failed.
30
Second hand
Note
●
Even if there was a successful time
calibration signal receive operation or
connection with a phone, the second
hand will point to
[N(NO)] if you
adjusted the time and/or date setting
manually.
Operation Guide 5596
7

Casio 5596 Specifications

General

Brand	Casio
Model	5596
Category	Watch
Language	English