Casio 5596 User Manual

●
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever
you want to adjust the watch’s time
setting based on your phone's time, perform
the procedure below to connect with a phone.
1.
Move
the phone close to (within one meter
of) the watch.
2.
X
Hold down (A) for at least 0.5 seconds.
Release
the button when the second hand
moves to [C].
When the watch connects with a phone,
the second hand will normally move to
[Y(YES)]
and then the watch’s time setting
will be adjusted.
●
The connection is terminated
automatically after time adjustment is
complete.
30
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use OCEANUS
Connected to adjust them.
1.
Y
Tap the
“OCEANUS Connected” icon.
2.
X
Hold down (A) for at least 2.5 seconds.
Release
the button when the second hand
moves to [C].
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Note
●
The movement of some hands are
linked with other hands. When
correcting the alignment of such a
hand, you will have to correct the
alignment of the linked hand(s) at the
same time.
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced
to sound even if the phone is in vibrate
mode.
Important!
●
Do
not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press (A) to terminate the connection.
30 30
Disconnected
Connected
2.
X
Hold
down (A) for at least five seconds.
Release the button when the second hand
moves to [C].
When a connection is established
between the watch and phone, the
watch’s second hand will perform one
revolution and the phone’s ringtone will
sound.
●
It will take a few seconds before the
phone tone sounds.
3.
X
Press (A) to stop the tone.
●
You
can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
You can use OCEANUS Connected to specify
the amount of time until the Bluetooth
connection
is automatically terminated, and to
configure other watch settings.
1.
Y
Tap the
“OCEANUS Connected” icon.
2.
X
Hold down (A) for at least 2.5 seconds.
Release
the button when the second hand
moves to [C].
This establishes a connection between
the watch and phone.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with OCEANUS Connected.
1.
Y
Tap the
“OCEANUS Connected” icon.
2.
X
Hold down (A) for at least 2.5 seconds.
Release
the button when the second hand
moves to [C].
This establishes a connection between
the watch and phone.
3.
Y
Use
OCEANUS Connected to check the
charge level.
Operation Guide 5596
9

Casio 5596 Specifications

General

Brand	Casio
Model	5596
Category	Watch
Language	English