Recording Your Keyboard Play
EN-123
Use the procedure below to record a performance using tone and rhythm functions.
1.
Press TONE or RHYTHM.
2.
Rotate the dial to select a tone or rhythm.
3.
Press RECORD.
This displays “(REC)” and enters record standby.
• With Tone Recording, the initial default beat setting is the metronome beat setting.
• With Rhythm Recording, the initial default time signature setting is the rhythm time signature
setting.
• For information about changing the beat setting to be used for recording, see “Changing the
Beat Setting for Recording” (page EN-125).
4.
Play something on the keyboard.
This displays “REC” along with the current measure and beat numbers, indicating that recording
has started.
5.
To exit the recording operation, press RECORD again.
After recording is complete, the song screen appears with the saved song recording displayed.
• A Tone Recording is displayed in the case of Tone Recording, while a Rhythm Recording is
displayed in the case of Rhythm Recording.
Easy Keyboard Play Recording
To Next Page
Loading...
Need help?
General
