Casio CE-2400O User Manual

81
User Maintenance and Options
Stamp pad holder
Stamp pad
Back of stamp
pad
To replenish stamp ink
1. Remove the printer cover.
2. Grasp the stamp pad on both side and lift it out of its holder.
3. Fill one or two drops of ink into the hole on the back of the stamp.
4. Replace the stamp pad in its holder.
5. Replace the printer cover.
Important!
Use only CASIO SUPER INK K. Chemical reaction between different of types of ink can damage the
stamp pad.
To replace the ink roll
1. Remove the printer cover.
2. Grasp the center of the old ink roll and pull it towards you to remove it (Figure 1).
3. Install a new ink roll, inserting it straight into the register. Make sure that it fits securely in place (Figure 2).
4. Replace the printer cover.
Figure 1 Figure 2
Important!
Use only IR-93 ink rolls. Other types of ink rolls can damage the printer. Never try to extend the life
of an ink roll replenishing the ink. Once an ink roll is in place, press the n key to test for correct
operation.

Casio CE-2400O Specifications

General

Brand	Casio
Model	CE-2400O
Category	Cash Register
Language	English