— 1 —
Product introduction
This machine CE-3700(EX-278) is a succession machine for CE-3400(EX-253).
The simultaneous boot model is EX-279.
EX-278: The drawer not separation type.
EX-279: The drawer separation type.
The Rom/Ram is the internal organs.
1. SPECIFICATION
1-1. Product
Operating temperature: 0 °C ~ 40 °C
Operation air moisture: 10 % ~ 90 %
Storage temperature: -25 °C ~ 65 °C
Storage air moisture: 10 % ~ 95 %
Bombardment strength: To add bombardment from 10 high cm by single support, and there
isn’t the problem.
1-2. Package status
Storage temperature: -25 °C ~ 65 °C
Storage air moisture: 10 % ~ 95 %
Vibration strength: 1.5 G
Bombardment strength: To add bombardment from 60 high cm by single support, and there
isn’t the problem.
1-3. Accessory specifications
Roll paper: P-4575 (EX-P-4574), 45 X 12 X 30 D
Stamp logotype: CSP-2030ASA-2
Ink for supplement: Super Ink KC
Ink roll: IR-92 (EX-INK-IR-92-OP)
Dust cover: Only 1 part neighborhood
1-4. Printer
CR-812A-009-14-001A: Europe
CR-812A-009-15-001A: USA, Canada, UK, Europe
Printing type: ring select mode
Output sheet number: 2
Chart specifications
Paper width: 44.5 ± 0.5 mm
Maximum paper diameter: Ø 83 mm
Maximum paper thickness: 0.06 ~ 0.085 mm
Materials: Regular paper
Inking: Ink roll
Validation
Print specifications: Yes
Sensor: No
Paper cut: Manual
Stamp
Color: Purple
Seal side dimension: 30 mm (W) X 20 mm (H)
To Next Page
Loading...
Need help?
General
