— 5 —
4-2. Auto or Reset switch initialize
Operation Display Printing
Input value D1 ~ D5
D1 0: YYMMDD
1: MMDDYY
2: DDMMYY
D2 1: General (Add2, DDMMYY)
2: US (Add2, MMDDYY)
3: General (Add3, DDMMYY)
5: Canada (Add2, MMDDYY)
D3,D4 Department No. General 15
US 30
D5 Clerk specification Switch: 1,2,4
Password No.: 0 (U.S.A. & Canada)
Note: Operation code with Init.B is set up as with settlement in “00000”.
4-3. Flag clear
To do Initialization of work memory, and make the operation sequence with the latest status.
Operation Display Printing
XXXX: Rom Control No.
-- XXXX --
D1D2D3D4D5
---------------
0000000000
D1D2D3D4D5
P1
0
To push Reset SW.
or
Power on In Low batt.
D1 ~ D5
#-2
XXXX: Rom Control No.
-- XXXX --
FFFFFFFFF
P1 0
#-2
Power off
To continued pushing
R-feed button, and
To set the MODE
switch to Program.
Header printing
To release from the
J-feed button.
D1D2D3D4D5
P1P2P3P4P5P6P7P8
X1X2X3X4
M1M2-D1D2-Y1Y2
---------------
Password for P1~P8
Password for X1~X4:
X2/Z2
M1M2D1D2Y1Y2
To Next Page
Loading...
Need help?
General
