•
Cartridge
Memory
If you insert
an optional
RAM cartridge,
you
can increase
the memory
capacity by a further 16
tones. You can then store
the data for 32 new sounds in all,
including
those in
the internal
memory.
<
Inserting and
removing
the
RAM cartridge
>
Please insert by
pushing firmly.
RAM cartridge
(RA-3, Option)
*
Insertion and removal of the cartridge should
be performed
only when the power has been
turned off.
If the RAM
cartridge is inserted or removed
with the power turned on, the data in the cart-
ridge
may change,
the
keyboard
may lock
up and produce no sound, or you may no
longer be able
to
turn off power
at all. To
avoid such problems, follow
the instruction
above.
The
cartridge
memory
tones can be recalled
by first pushing the CARTRIDGE Memory key and
then
selecting the tone
with
the
corresponding
tone
selector.
*
When no RAM cartridge is inserted, it is not possible
to select any cartridge memory tones
even
if
you
press the CARTRIDGE Memory
key.
•
COMPARE/RECALL Key
As
soon
as you
change any parameter of preset,
internal memory or cartridge memory
tone
data
by operating the Data
Entry section, the altered tone data will be stored
temporarily
in
a
special
compare/recall area.
If there has been any alteration in a
tone
you
have
recalled, this alterated tone data is
immediately
and
automatically stored in the
compare/recall area
and the indicator of the
COMPARE/RECALL
key will
light
up.
If
you
now
press the
COMPARE/RECALL key, the
sound
as
it
was preceding the
alteration
will be recalled. Pressing the
COMPARE/RECALL key again
will
restore the
altered sound,
and so on.
This practical feature
thus allows you to
continuously compare the sound before and
after an
alteration.
PRESET
INTE
RNAL
CARTRIDGE
MEM
ORY
COMPARE
/RECALL
This shows the condition
when preset tone
no.
3
has been selected.
10
1
11
13
©Gsing the
Parameter
section and the
Data
Entry section,
alter the tone data.
•2D*
To Next Page
Loading...
Need help?
General
