76
Other Playback Functions (PLAY)
Procedure
Enter the PLAY Mode * Display snapshot * MENU * Paint
You can use this function to draw on, write on, or stamp information into a recorded
snapshot. If the original image size is 3M or larger, the post-paint image is saved as a
3M size image.
1. On the right side of the monitor screen,
touch “ ” or “ ”.
2. Touch the pen type or the stamp you want to
use.
3. Use the pen to write text or draw figures, or
use the stamp to stamp information.
4. Touch “OK”.
5. Touch “Yes”.
This will save the image as a new image.
. Paint Functions
NOTE
• After selecting “ ”, you can change either the color (or eraser) or thickness
setting only. To change the other setting, select “ ” again.
Performing Paint Operations on an Image (Paint)
Exits paint without saving an image.
For selecting the pen color and thickness for drawing or writing. Also
can be used to select the eraser and its thickness.
For selecting the stamp type.
Goes back to the previous screen.
Saves the image.
To Next Page
Loading...
Need help?
General
