105
Using the Hybrid-GPS
This section explains the menu items that are used when performing operations and
configuring settings in the MAP mode.
Procedure
[ý] (MAP) * [MENU] * MAP Tab * Save Log
You can use this procedure to save position information from different locations and
different times. While “On” is selected for the “Save Log” setting, the following
information is saved in camera memory for 14 days as positioning log data.
– Date (year, month, day) and time (hour, minute)
– Latitude and longitude
– Altitude (When GPS positioning is performed.)
– Positioning method and positioning accuracy
• The current “Save Log” setting is ignored while “Off” is selected for the “GPS”
setting (page 92).
• Formatting the camera’s built-in memory deletes all positioning log data stored
there.
IMPORTANT!
• Note that in China it is against the law to accumulate a log of position information
without the permission of government authorities. Be sure to select “Off” for the
“Save Log” setting if you are using the camera in China and do not have such
permission.
Procedure
[ý] (MAP) * [MENU] * MAP Tab * Show Log
You can track you movements by displaying positioning log data on a map. Selecting
“On” for the “Show Log” setting causes saved positioning log data to be displayed on
the map.
Procedure
[ý] (MAP) * [MENU] * MAP Tab * Log Period
This setting lets you specify how many past days of track data should be displayed on
map.
Using Other Map Data (MAP Tab Menu)
For information about menu operations, see page 58.
Saving Position Information (Save Log)
Tracking Your Movements on a Map (Show Log)
Specifying the Display Period of Tracks (Log Period)
C
To Next Page
Loading...
Need help?
General
