109
Dynamic Photo
6. Use [8] and [2] to specify the subject type, and then press [SET].
• To create a still subject, select “Still Subject”.
7. Press [SET], use [8] and [2] to select “Number of Shots”, and then
press [SET].
8. Use [8] and [2] to select either “1” or “2” and then press [SET].
CS speed
Number of
Shots
Subject type
Moving Subject
1sec (18fps)
18 images per
second
20 shots
Records multiple images of
the subject, which are
cropped and combined to
create movement against
the background image.
Moving Subject
2sec (10fps)
10 images per
second
20 shots
Moving Subject
4sec (5fps)
5 images per
second
20 shots
Still Subject – 1 shot
Records a single subject,
which is cropped and
inserted into the
background image.
To shoot under these
conditions:
Select
this
setting:
Select this option:
The subject against a
complex background
2
You need to shoot twice to extract the
subject.
The subject against a
plain (no pattern)
background
1
You need to shoot only once to extract the
subject. If you select this option, you will
not need to perform steps 10 and 11 of the
procedure below.
Text written on white
paper
Text See page 111.
To Next Page
Loading...
Need help?
General
