4
Using the Dynamic Photo Extracted Sample Subjects
6. After creation of the Dynamic Photo image is complete, the finished
image with the inserted moving subject will appear on the monitor
screen.
After you master the above procedure using extracted sample subjects, you will
be ready to create your own extracted subjects and insert them into snapshots or
movies for totally original Dynamic Photo images.
• You will not be able to access the extracted sample
subjects in built-in camera memory while a memory card
is loaded in the camera. If you want to use the extracted
sample subjects while a memory card is loaded in the
camera, use the “Built-in * Card” copy operation to
copy the extracted sample subjects from built-in camera
memory to the memory card.
• Performing a delete or format operation will not delete the extracted sample
subjects in built-in camera memory.
• Note that the extracted sample subjects include some subjects that cannot be
created using the Dynamic Photo feature of this camera.
Important!
To Next Page
Loading...
Need help?
General
