50
Snapshot Tutorial
. Zoom Factor
The digital zoom factor depends on the image size (page 35) and on whether Single
SR Zoom is enabled or disabled.
Super resolution technology is used to analyze the image, and then interpolation is
performed to avoid loss of overall resolution that occurs when using zoom. For
information about the effective zoom factor ranges in which Single SR Zoom is
effective, see page 50.
1. In the REC mode, press [SET].
2. Use [8] and [2] to select the second Control Panel option from the
bottom (MENU) and then press [SET].
3. Use [4] and [6] to select the “Quality” tab.
4. Use [8] and [2] to select “Single SR Zoom” and then press [6].
5. Use [8] and [2] to select “On” and then press [SET].
NOTE
• Single SR Zoom is effective when you want to capture delicate textures.
• Single SR Zoom does not work during movie recording.
• The following functions are disabled when shooting with Single SR Zoom.
Continuous Shutter, Triple Self-timer, Make-up Mode, some BEST SHOT scenes
Image size
Maximum zoom factor for
undeteriorated resolution
Total maximum
zoom factor
Single SR Zoom:
Off
Single SR Zoom:
On
14M 4X 6X 16X
3:2 4X 6X 16X
16:9 4X 6X 16X
10M 4.7X 7.1X 19X
6M 6.1X 9.2X 24.5X
3M 8.4X 12.6X 33.7X
VGA 27.0X 40.4X 63.8X
Zooming with Minimal Loss of Snapshot Resolution
(Single SR Zoom)
To Next Page
Loading...
Need help?
General
