90
Advanced Settings
Tips for Best Face Detection Results
• The camera performs center focus if it cannot detect a face.
• Always make sure that Auto Focus (AF) is selected as the focus mode when
shooting with face detection.
• Detection of the following types of faces is not supported.
– A face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade
– A profile or a face that is at an angle
– A face that is very far away and small, or very close and large
– A face in an area that is very dark
– A face of a pet or some other non-human subject
IMPORTANT!
• Face detection cannot be used in combination with any of the following features.
– Some Single Shot mode BEST SHOT scenes (For YouTube, Prerecord (Movie))
– Some HS BEST SHOT scenes (except “Auto”)
– Movie Mode (Including some BEST SHOT scenes that support High Speed
Movie recording)
– High Speed CS with Prerecord CS (Including some BEST SHOT scenes that
support High Speed CS recording)
• The “Focus” setting is always fixed at Q (Auto Focus) whenever “Face Detection”
is being used. If you want to change the “Focus” setting, first select “Off” for “Face
Detection”.
Procedure
[r] (REC) * [MENU] * REC Tab * Continuous AF
When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is
performed and focusing is continually updated until you half-press the shutter button.
• Before you half-press the shutter button, the camera focuses at the center of the
screen.
Shooting with Continuous Auto Focus (Continuous AF)
B
To Next Page
Loading...
Need help?
General
