Casio G-Shock QW-3403 User Manual

– 13 –13 ––
QW-3403
8. DEVICE TEST: MODULE QW-3403
8-1. DEVICE TEST MODE
Timekeeping mode
Device Test Display
++
, , 

Support the 6-o’clock side as a fulcrum
and tilt the watch by 45°
VIBRATOR TEST
(LCD Display: VIB)
EXECUTING MODE
(LCD Display: EXE)
, 
,

BEEP
VIBE alarm×2

HOW TO CHECK TILT SENSOR
(LCD Display: TLT)
LCD Display: TLT 8888







* Press  to turn on the light., , 

Note:
• ThewatchreturnstotheTimekeepingmodewhenitisleftuntouchedfor1to2hoursafterthelast
buttonoperation.(AutoReturn)
• ThewatchdoesnotreturntotheTimekeepingmodewhenthealarmgoesoff.
• TheAutoLightfunctionisdisabledwhenthewatchentersthetestmode.
8-2. VIBRATOR TEST
1) While in the Timekeeping mode, hold down
A
and press
D
and
B
at the same time.
2) Press
B
.
3) Check that “VIB” is displayed on the LCD.
4) When you press
D
, the display changes to “EXE”.
5) Press
B
andcheckthatthevibrationalarmoperatestwiceaftertwoalarmsounds.
6) ExittheVibratorTestmode.
•Press
D
, then “VIB” is displayed. Press
B
to proceed to How to check Tilt Sensor mode.
•Press
A
or
C
to return to the Timekeeping mode.

Casio G-Shock QW-3403 Specifications

General

Brand	Casio
Model	G-Shock QW-3403
Category	Watch
Language	English