Casio KL-100 User Manual

E-19
Item
Display
Memory
SYMBOL
EFFECT
STYLE
M-FEED
MIRROR
MEMO
DENSITY
6 mm
Reset
Cleared
Cleared
,
CANCEL
NORMAL
NO
OFF
STR?
3
OFF
Back cover is not closed
completely.
No more tape left in the
cartridge.
Tape jam
Securely close the back cover.
Replace the tape cartridge with a new one.
Remove the tape cartridge and pull out the
jammed tape by hand. Cut off excess tape with
scissors, and carefully replace the cartridge into
the label printer.
Important!
Never allow the tape outlet to become blocked
and never touch tape as it is being fed during
printing.
Tape comes out when PRINT is pressed, but nothing is printed on it.
Possible Cause Action
Only blank spaces were
input.
Input the text you want to print.
Tape does not come out when PRINT is pressed.
Possible Causes Action
Printing is blurred, blotched, broken, etc.
Possible Causes Action
Improper print density set-
ting
Improper loading of the
cartridge
Dirty print head or rubber
roller
Adjust the print density setting.
Remove the tape cartridge and reload it cor-
rectly.
Clean the printer head and roller.
Troubleshooting
••
••
• Power Supply
••
••
• Text Input
Low batteries
Batteries loaded incor-
rectly
AC adaptor is not con-
nected correctly.
Replace batteries.
Remove batteries and reload them correctly.
Make sure the AC adaptor is connected cor-
rectly.
Nothing appears on the display.
Possible Causes Action
FUNCTION key has been
pressed.
Press ESC to clear FUNCTION key operation.
Cannot input text.
Possible Cause Action

Casio KL-100 Specifications

General

Brand	Casio
Model	KL-100
Category	Label Maker
Language	English