EN-6
General Guide
The liquid crystal panel of the monitor screen uses
high-precision technology that provides a pixel yield in
excess of 99.99%. This means that some very small
number of pixels may not light or may remain lit at all
times. This is due to the characteristics of the liquid
crystal panel, and does not indicate malfunction.
Your Digital Piano lets you save its current settings,
and lock its buttons to protect against operation errors.
For details, see “Auto Resume” (page EN-75) and
“Operation Lock” (page EN-74).
Perform the following procedure when you want to
return the Digital Piano’s stored data and settings to
their initial factory defaults.
1.
Turn off the Digital Piano.
2.
While holding down the cm TEMPO w, q
buttons, press the 1 P button.
• The Digital Piano will turn on and initialize its
internal system. You will be able to use the Digital
Piano in a short while.
• See “Turning Power On or Off” (page EN-7) for
information about turning power on and off.
LCD Panel
Saving Settings and Using
Panel Lock
Returning the Digital Piano to
Its Factory Default Settings
PX560-ES-1A.indd 8 2015/06/18 14:53:41
To Next Page
Loading...
Need help?
General
