EN-40
USB Flash Drive (PX-870)
You can use the procedure below to load user song
data (page EN-46) from a USB flash drive to the Digital
Piano’s Music Library (song numbers 61 to 70). After
that, you can play back the user song or use it for
lesson play.
• Loading song data from a USB flash drive assigns it
to the corresponding user song number. Loading
song data 61 from a USB flash drive, for example,
will assign it to user song number 61 in Digital Piano
memory. Then you will be able to select the song by
selecting user (Music Library) song 61.
1.
On your computer, copy the file you want to
load to one of the numbered sub-folders (61
through 70) inside the “MUSICLIB” folder on
the USB flash drive.
• The number names of the sub-folders correspond to
the Digital Piano’s user song numbers (61 to 70).
2.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
3.
While holding down the FUNCTION button,
press the keyboard key that corresponds to
the USB flash drive mode.
• This will cause the L/R lamps to flash.
4.
While holding down the FUNCTION button,
press the load USB flash drive keyboard key.
• This will cause the GRAND PIANO lamp to light.
• To cancel the load operation, hold down the
FUNCTION button as you press the USB flash drive
mode key.
Loading Song Data from a
USB Flash Drive into Digital
Piano Memory
\MUSICLIB
\70
\62
\61
\MUSICLIB
\70
\62
\61
\PIANO\
.MID files or
.CM2 files
.MID files or
.CM2 files
<Data Loaded>
USB flash driveDigital Piano memory
To Next Page
Loading...
Need help?
General
