EN-42
USB Flash Drive (PX-870)
4.
Hold down the FUNCTION button as you use
the MUSIC LIBRARY SELECT keyboard
keys to select a song number (61 to 70).
• The Digital Piano will emit a short beep if you specify
a correct song number, and a long beep if the song
number is not correct.
5.
Press the a button.
• This starts deletion of the selected data.
• When deleting is complete, the L/R lamps will go out
to indicate that the USB flash drive mode has been
exited.
You can use the procedure below to play back a user
song (page EN-46) stored on a USB flash drive without
loading the song into Digital Piano Music Library
memory (song numbers 61 to 70).
1.
On your computer, copy the data you want to
play back on the Digital Piano into the
MUSICLIB folder on the USB flash drive.
• Of the song data in the MUSICLIB folder, you can
select any of the first 00 to 99 songs, sorted in file
name sequence, for playback.
2.
Insert the USB flash drive into the Digital
Piano’s USB flash drive port.
3.
While holding down the FUNCTION button,
press the keyboard key that corresponds to
the USB flash drive mode.
• This will cause the L/R lamps to flash.
4.
Press the a button.
• This will start playback of the song data.
• Press the a button again to stop playback.
5.
To change to another song, hold down the
FUNCTION button as you use the MUSIC
LIBRARY SELECT plus (+) and minus (–)
keyboard keys to select the song you want to
hear.
• Pressing the plus (+) or minus (–) key scrolls through
song file names.
• You can also input a value from 0 to 9 to specify a
Music Library song number.
• Input two digits as the song number.
Example: To specify song number 5, press keys 0 and
then 5
6.
To exit the USB flash drive song playback
function, hold down the FUNCTION button as
you press the USB flash drive mode key.
Flashing Unlit
Delete start Delete complete
Simple Play Back of a Song on
a USB Flash Drive
To Next Page
Loading...
Need help?
General
