• Other (Warranty, etc.)
Items included as accessories are subject to change without notice.
Separately Available Accessories You can get information about accessories that are separately available for this product from the CASIO
catalog available from your retailer, and from the CASIO website at the URL or QR code below.
https://support.casio.com/global/en/emi/manual/PX-S1000/
Getting Ready
■ Using the AC Adaptor
Make sure that you use only the AC adaptor specified for this Digital Piano. Use of a different type of AC adaptor can cause malfunction.
Specified AC Adaptor: AD-A12150LW (JEITA Standard plug)
IMPORTANT!
Never connect the AC adaptor (JEITA Standard, with unified polarity plug) that comes with this Digital Piano to any other device besides
this Digital Piano.
Doing so creates the risk of malfunction.
Be sure to turn off Digital Piano power before connecting or disconnecting the AC adaptor.
The AC adaptor will become warm to the touch after very long use. This is normal and does not indicate malfunction.
■ Using Batteries
IMPORTANT!
Be sure to turn off power before loading batteries.
It is up to you to prepare six commercially available alkaline batteries.
Note the following precautions while the Digital Piano is turned upside down to load batteries.
− Take care to avoid injury due to pinching your fingers under the Digital Piano.
− Do not allow the Digital Piano to tip over or otherwise be subjected to strong impact. Impact can damage the volume knob and
keyboard keys.
1. Open the battery cover on the bottom of the Digital Piano.
2. Load six AA-size batteries into the battery compartment.
Make sure the positive + and negative – ends of the batteries are facing as marked on the Digital Piano.
3. Insert the tabs of the battery cover into the holes on the side of the battery compartment, and close the cover.
■ Low Battery Indicator
Low power is indicated when the lights of all the touch buttons, except for the 3 FUNCTION, start to flash. When this happens, try lowering the
volume level. If this does not stop the flashing, replace the batteries with new ones.
IMPORTANT!
• Continued use with low batteries will cause Digital Piano power to turn off automatically. This can cause data stored in Digital Piano memory
to be corrupted or lost.
Turning Power On or Off
1. Before turning on power, rotate the 2 volume knob as far as it will go in the direction shown in the illustration below.
2. Press the 1 (Power) button to turn on power.
Turning on power will cause the lights of the front panel touch button to light in sequence from left to right (3 FUNCTION to 9 ELEC. PIANO ).
To Next Page
Loading...
Need help?
General
