75
OTHER RECORDING FUNCTIONS
• Pressing [] or [] causes the area inside of the
boundary displayed in step 1 to fill the monitor
screen momentarily to aid in focus. The normal
image reappears a short while later.
3.
Record the image.
IMPORTANT!
• In the Manual Focus mode, the [] and [] keys
adjust focus, even if you used key customization to
assign other functions to them (page 104).
To do this:
Focus in on the subject
Focus out on the subject
Do this:
Press [].
Press [].
Manual focus position
NOTE
• Whenever you perform an optical zoom operation
(page 57) while recording with manual focus, a value
will appear on the monitor screen as shown below to
tell you the focusing range.
Example: MF 10cm - ∞
2.
While watching the
image on the monitor
screen, use [] and
[] to focus.
To Next Page
Loading...
Need help?
General
