– 3 –
SE-S400/SE-S800/PCR-T500/PCR-T520/SE-C450
SE-S3000/SE-S900/PCR-T2300/PCR-T2400/SE-C3500
2. INITIALIZATION
(1) Plug the power cord to a power outlet with the Mode Switch OFF.
(2) While holding down the key, turn the Mode Switch to [PGM].
NOTE: The key to press varies according to the model. See below.
One-printer model [FEED]
Two-printer model [JOURNAL FEED]
(3) Release the key.
(4) The display below appears when you release the key.
INIT
0000000000
(5) Enter the INIT Code to set the INIT Code.
NOTE: It will take about 1 minute.
Press "INIT code"
s
.
Region Model Name INIT Code
US
SE-S400, PCR-T500, SE-S800 22500
SE-S400 (Dealer) 22540
SE-S3000, PCR-T2300, SE-S900 23000
SE-S3000 (Dealer) 23040
SE-C450 (Dealer), SE-C3500 (Dealer)
27200
CANADA
PCR-T500, PCR-T520 92500
PCR-T2300, PCR-T2400 93000
EU
SE-S400 12540
SE-S3000
13040
SE-C450, SE-C3500
17200
UK
SE-S400 12540
SE-S3000
13040
SE-C450, SE-C3500
17200
Other areas
SE-S400 12540
SE-S3000
13040
SE-C450, SE-C3500
17200